Fix Unmountable Boot Volume Error in Windows 10

You thought that the Bluescreen of death error is the only dangerous error in Windows. But now you recently faced another error – the unmountable boot volume error on your Windows 10 system, which has worried you more than ever. Well, the Unmountable Boot Volume error is a serious one, and it is caused by corrupted system files, damaged hard drive, or damaged RAM.

If you try to fix the issue by yourself and go wrong in any step, then you risk losing all your important files and folders present on the hard drive. You might want to format the hard drive to see if the problem gets solved. But this will only erase all the data present in the drive. Don’t worry; we tell you how to fix the unmountable boot volume error in Windows 10.

Fix 1: Using CHKDSK command

  • Start your system using Windows 10 media tool
  • Select Repair your computer option that is located at the left lower corner
  • Choose Command Prompt, type chkdsk /r c: and press Enter command
  • Replace the drive letter with C: and select Y
  • Reboot the system

This command will check the system for any possible errors.

Fix 2: Master Boot Record Fix

  • Start your system using a Windows 10 bootable device
  • In Command Prompt window, type the following: bootrec / fixboot, then press Enter 
  • Now restart your computer

Fix 3: Automatic Repair

  • Start the system using Windows Bootable device, and select Repair your computer option
  • Select Troubleshoot > Advanced options > Automatic Repair > Next
  • Select the operating system version and wait till the repair process is completed

Hope these methods were used, and you were able to fix the error message on Windows 10. Sometimes if you go wrong with the fixing process, and unfortunately end up losing data from Windows 10, then use a Data Recovery tool to get back your files. Or, even if you have formatted the drive when you initially encountered an error message, then make use of this tool to recover data after format on Windows 10 system. Files can be recovered from Windows 10 drive even after reformat, corruption when drive turns RAW, and so on.


How to Disable System Integrity Protection in High Sierra

Well, disabling Mac’s security feature is not something to be considered as lightly!

As a security feature, Apple introduced System Integrity Protection (SIP) mode for its macOS. It is a well-known feature in macOS 10.12 Sierra and macOS 10.13 High Sierra that protects files, directories, and processes at the root level from being modified. By protecting access to system locations and restricting runtime attachment to system processes, this security policy guard against compromise, whether accidental or by malicious code.

Further, macOS applies this security policy to every process running on the system, regardless of whether it’s running with administrative privileges or something else. System Integrity Protection is activated by default but can be easily disabled.

So if you are willing to turn off System Integrity Protection (SIP) on your macOS High Sierra, then you won’t be a complete newcomer to computing and have a pretty good reason to do so.

Let’s see how to turn off SIP on macOS High Sierra

Removing SIP is something of a hassle because you need to restart your Mac in Recovery Mode. Make sure that you re-enable SIP as soon as you’ve finished with whatever task it was interfering with. It forms a vital part of OS X’s security system.

Assuming that you know what you’re doing, here is how to turn off System Integrity Protection on your Mac.

  • Turn off your Mac (Apple > Shut Down)
  • Hold down Command-R and press the Power button. Keep holding Command-R until the Apple logo appears
  • Wait for OS X to boot into the OS X Utility window
  • Choose Utilities > Terminal
  • Enter csrutil disable
  • Enter reboot

Now your Mac will reboot and start up with SIP disabled. To check the status of SIP, open Terminal and enter csrutil status. You should see “System Integrity Protection status: disabled.”

How to re-enable SIP?

Well, it’s important to re-enable SIP when you’ve finished your task. Here’s how to set OS X rootless mode back on:

  • Turn off your Mac (Apple > Shut Down)
  • Hold down Command-R and press the Power button. Keep holding Command-R until the Apple logo appears
  • Wait for OS X to boot into the OS X Utility window
  • Choose Utilities > Terminal
  • Enter csrutil enable
  • Enter reboot

Again to check status, open Terminal and enter csrutil status. It should say “System Integrity Protection status: enabled.”

For some power users, SIP can be a major headache as it prevents all kind of software from being installed and doesn’t let you work outside your home directory even if using “sudo” at the command line, or when logged in as the “root” user. But if you don’t know what “sudo” or the “root” user is then you may stop right here! However, SIP exists for good reason, and most users are infinitely advantageous with it enabled.

“If you have recently upgraded to macOS High Sierra and lost any data during that process, then you can make use of Remo Recover Software to get back lost files in simple steps.”


3 Simple Tips for Recording Long-Form in DSLR Productions

DSLR cameras are aces in video making technology, yet they are not truly meant for recording long-form videos. Generally, for most of the long-form records, you need to either cut-rate camcorders or higher-end options.

However, if you want to use your trusty prosumers (such as Canon 5D or similar production) to record long-form video, then here are 3 basic tricks you can try in DSLR that makes your job done.

  1. Get The Best Out of Recording Aptitude

If you are acquainted with typical DSLRs, you might be aware of the fact that maximum recording ability for the camera is 30 minutes (or 25 minutes and 59 seconds) as mentioned in the respective manual.

But, it is not true actually in a couple of cases. Even though there is a specified max time limit built into the camera, you can do some fine-tuning. Yes, as you turn on the camera and hit the record button, you may notice that the camera can do things differently. Surprisingly, it maxes out the recording around 12 (or less) minutes.

There are few factors like card speed, battery life etc. responsible for this. So, how to maximize the camera recording capabilities then?

Well, to push your camera recording aptitude as much as probable, you can do few things. Basic thing is to reduce the recording quality as much as possible since the video quality plays a major role. This saves a lot in terms of card writing pace, memory, and battery lifetime.

You can also use external add-ons like battery packs, or you can try power the camera directly via an AC adapter. And, no need to mention that you should use the fastest card, along with all these tweaks.

  1. Muddle Through with External Add-Ons

Once the camera capability is maximized with above things (revision in inbuilt software), you can try to enhance it further through external add-on programs. There are various popular paid as well open-source third-party firmware that you can load into the camera’s firmware to gain more capability and control.

Probably, it would be the best way to get higher recording capability and quality in your DSLRs for creating RAW footages.

Caution: Usage of third-party firmware may void warranties in certain cameras. So, cross verify once before using them.

  1. One Camera is Not Enough! Get More

Even after extending the camera’s capabilities with built-in features and external firmware, you may fail to meet the full (expected) and uninterrupted shooting capabilities. If you are seeking ways to shoot a number of hours of continuous footage with DSLR quality, then the best and last option would be to go for more than one camera.

With two solid cameras, you can boost the camera’s capability and shoot extra minutes. While one camera is recording footage, let the other camera to warm up and swap batteries, cards.

Note: Camera cards are the most sensitive piece of storage and you need to handle them carefully. Accessing healthy card on corrupted camera (with broken/damaged firmware) leads to inaccessibility of the card. As a result, you may lose your precious videos stored on the affected card. So, pay heed to the usage of the card in different cameras. Else, you will have to recover videos from SD card, camera card, etc. after encountering unexpected data loss crisis.

Last but not least, the biggest trick while using more than one DSLR for shooting long-form footages is to make a setup where the associated cameras should be enough close to match the footage. It would be even better if you can use two cameras of exact lenses. And, maintain consistency in sensor size, lens length, ISO, and white balance.


How to Fix Operating System Was Not Found Error On Windows 10?

You turned on your Windows 10 and strike with an error screening that “An operating system wasn’t found. Try disconnecting any drives that don’t contain an operating system. Press Ctrl + Alt + Del to restart.”  Wondering, what caused this? Here are some common factors which might be the cause for OS not found error in Windows 10.

  • When BIOS fails to detect the drive that helps to install Windows
  • Hard drive failure
  • MBR corruption
  • Corruption of partition that holds Windows boot files

What Could be done to fix operating system was not found error on Windows 10?

It tells you to restart the computer by holding Ctrl + Alt + Del button, to solve the issue. Sometimes, you can get your Windows 10 to a normal state by pressing these buttons whereas in some situation it won’t work. Hence, I have listed out some easy techniques which may help you to get rid of OS not found error in Windows 10.

Fix #1:  Modify BIOS Settings

Restart your computer and hold down F12 (It will vary depending on the model and OS) to enter BIOS configuration. And, change internal hard drive as first boot device. It will fix OS not found error. If it doesn’t resolve, then try out the next method.

Fix #2: Windows Startup Repair

  1. Use Windows Boot Media to boot into Windows 10
  2. When startup screen appears, select appropriate Language, Time, Currency, and keyboard input method and then press Next.
  3. In the next screen, hit Repair your computer button
  4. Next, go to Troubleshoot > Advanced options > Startup Repair
  5. Wait for Windows diagnosing process to complete

It will take some time to complete the process. Don’t do anything while the process is being carried out. Once after completion, you will be able to boot into Windows without any error. It resolves OS not found error.

Fix #: Repair Boot Files

  1. Boot into Windows 10 using Windows Boot media
  2. Set Language, Time – Currency and keyboard input method in the setup screen and press Next
  3. Hold down SHIFT + F10 keys to open the command prompt in the next screen
  4. Once you open command prompt, next step is to find whether your drive is set to GPT or MBR for that type diskpart and hit enter
  5. Then type list disk and press Enter
  6. Locate your disk and then go to GPT column. If it has *, then it indicates that the disk is GPT. If no * means, drive is MBR.
  7. Exit from the diskpart

In case, disk is set to MBR, follow the steps mentioned below to repair boot files-

  • Type dir a: in command prompt and hit Enter.
  • When it shows directory list, look for the \Windows folder in the directory.
  • If you are unable to locate \Windows folder, then type dir b: and hit Enter button. And, type dir with every alphabet until you find a drive with the \Windows folder. But, don’t use alphabet X drive as it has installation files
  • After finding the drive containing \Windows folder, type:bcdboot drivename:\Windows /S drivename: [where drivename is drive letter of the disk in which you have found \Windows folder]
  • When you see “Boot files successfully created” message, you can continue with the next steps
  • Again type diskpart followed by list disk command in the command prompt
  • Next, type sel disk drivename and press Enter [ replace drivename with the drive where Windows folder was found]
  • Then, type list vol and hit Enter. Again, type sel vol drivename and press Enter [where drivename is the drive where Windows folder was found]
  • Next, type active and hit Enter button
  • You will be get notified once the volume is successfully set to active.

If disk is set to GPT, then do as follows-

  • Type dir a: and press Enter, in case a is the drive where your \Windows folder is present. If not and you don’t know the drive where your \Windows folder is present, then type dir with every alphabet.
  • Next, type diskpart command followed by list disk and press Enter
  • Then, type sel disk drivename and press Enter (replace drive name with the drive letter of disk containing Windows folder)
  • Next type list part command and hit Enter.
  • Now, find the partition that is labeled as System
  • Once you find the system partition, name it as R. In case, R is already assigned to some other partition, then use any other alphabets. Type assign letter=r: to assign name to system partition.
  • Then, exit and again open command prompt to enter the following command. After each command line hit Enter button.

cd /d r:\EFI\Microsoft\Boot\

ren BCD BCD.bak

bcdboot c:\Windows /l en-us /s m: /f UEFI

Now, exit the command prompt and detach Windows 10 Boot Media. Then, turn on your Windows 10. If you are still getting an error, then reinstall your Windows 10. In case, you end up losing data due to reinstallation, then use data recovery tools and recover lost data from partition of your Windows 10 drive.


Converting the File System without Formatting or Losing Data

Certain operating systems can recognize only one file system and if you want to keep more than one OS or make the most efficient use of your disk drive, you have to change file system. Some of the common file systems are FAT, FAT32, NTFS, etc.

Assume you have a flash drive or probably an external hard drive that currently has a FAT32 file system and you want to change it to NTFS as FAT32 does not support handling large files (over 4GB) or it is just simply old according to your consideration. But there is just one problem, you don’t want to lose your saved data. Well, this article explains exactly how you can convert one file system to another without formatting or loss of data.

While it is generally recommended to use the NTFS file system because of its stability, security and lesser defragmentation time, most of us end up using FAT32 because that is what most disks are preformatted with. Unless we notice the “Not enough disk space error” despite disk space being available, we don’t bother to change the file system. Moreover, most of us don’t change it because of the risk of losing important data and lack of time.

Fortunately, Microsoft added a capability in the command prompt to overcome this by executing a simple command. Even though there are many applications that support this, but the Convert command is one of the easiest ways to do so. Follow the steps below to know how:-

Caution: While this method works perfectly, it is still advised you to back up your data in case anything goes wrong.

Steps to change FAT32 to NTFS

  • Go to Computer, and note the name of the drive whose file system you wish to convert
  • Navigate to Start
  • Type cmd in the search bar if you use Windows 7, Windows 8, Windows 8.1 or Windows 10. If you use Windows XP, click on Run and then execute cmd
  • Execute “chkdsk h: /f ” (without quotes) where H is the letter of the drive to undergo conversion. This checks the drive for errors and fixes them automatically
  • Execute “Convert H: /FS:NTFS” (without quotes). H is again the letter of the drive to be converted
  • The command prompt will start the conversion process and after a few minutes, CMD will say that conversion was successful
  • You can check it in the properties of the drive through right click > Properties

This command can also be used to convert FAT16 disks and works on Windows 10, Windows 8, Windows 8.1, Windows 7, Windows XP and Windows Vista. But it is important to note that this method cannot be used to reconvert NTFS file system back to FAT32. To reconvert back to FAT32, you will need to format the entire drive which will definitely cause data loss.

However, if anything goes wrong while changing file system or you accidentally formatted the entire drive to reconvert the file system back, especially when there is no backup, there would be a need to recover lost data. So under such cases, a reliable data recovery software is applicable.

Remo Recover is capable of restoring deleted/lost files or formatted partition from a hard drive (HDD and SSD), external hard drive, USB flash drive, memory card, digital camera, camcorder, iPod, etc. While offering the advanced recovery mode Formatted/ Reformatted Recovery it`s pretty easy to use.

“If you are looking to recover deleted partition from SSD drive, then use Remo Recover and get the job done in few minutes and simple steps.”


How to Fix Black Screen Problem in Windows 10?

Even with the latest Windows 10 install, there is always a risk of facing unexpected errors. One such error is Windows 10 booting to a black screen. Perhaps this is one of the worse errors you can come across on Windows 10 computer, as the error would not be associated with any code or message giving you the hint where to start troubleshooting.

What can be done under such instance? Well, this post is all about fixing the Windows 10 booting to a black screen problem without affecting the data.

Recovering data from Windows 10 system booting to a black screen

Accidents may happen and data might get overwritten when fixing this black screen error and you may lose the data forever. So, it is suggested to recover data before going to resolve the above-said issue.

Remo Recover, a professional and simple data recovery software is recommended here. It offers a great solution to recover lost data when your Windows PC won’t boot, recover lost files when the drive is corrupted, formatted, etc. without making any damage to the original data.

Steps for recovering files from computer with booting issues

Download Remo Recover on a healthy PC and install it. Connect the victim hard drive to this PC and run the tool by double-clicking on the icon.

Step 1: From the main screen of the software, select “Recover Drives” option and move on to next step.

Step 2: From next window, choose either “Partition Recovery” option.

Step 3: Choose the hard drive from where you want to restore data from the list of logical drives and click on “Next” button to begin the scanning process.

Step 4: Once the recovery process is completed, list of recovered files and folders gets displayed.

Step 5: Preview them and save the required files on any storage location of your choice.

Now, let us discuss how to solve Windows 10 booting to a black screen with ease.


Resolving Windows 10 booting to a black screen

Basically, the problem might be seen in any one of these situations:

  • You see a black screen before logging into Windows 10
  • You see a black screen after logging into Windows 10

If black screen is encountered before logging into Windows 10

  1. Properly check the connections

If you’re using a desktop computer, double-check your display is connected properly to a power outlet and your computer, make sure your connected TV is turned on and set to the input for your PC. If possible, you can try switching to a different video output. Even sometimes, a change in the driver can send the video signal to a different output port. You can also try connecting a different monitor to your PC to confirm that it’s not a problem with your primary display.

  1. Remove and update your antivirus software

Sometimes, third-party antivirus software may cause black screens. Removing the software won’t leave your PC unprotected, for Windows Defender antivirus will kick in if no other antivirus software is running.

  1. Perform a clean boot on your PC

When none of the above solutions help you out, you can perform a clean boot of your PC.

If black screen is seen after logging into PC

  1. Type explorer.exe

If you see a black screen with cursor after logging in to the PC, you should first try pressing Ctrl + Alt + Del buttons and see if it brings up the Task Manager. If it does, click on File > Run new task. Type explorer.exe and hit Enter.

  1. Remove external devices

Unplug & remove all external devices and reboot. It might mean that one of the external hardware is causing the problem if you are able to get a display. Under such case, start plugging in external devices one by one until you lose display. Remove the last device you plugged in and see if you get the display back. If yes, don’t use that hardware device until you contact the device’s manufacturer. Check again with other external devices.

  1. Boot into Safe mode

If none of the solutions works out, there could be a number of other reasons and you can boot your computer in Safe Mode to try to fix Windows 10 booting into black screen problem.

Hope at least any one of the above troubleshooting methods help you fix Windows 10 booting into black screen problem!


Troubleshooting Tips for Solving QuickTime Issues

You may come across various problems while using QuickTime. Some issues can be resolved easily while some issues are difficult to tackle. Here I have listed out such issues and solutions to fix them.

Most Common Issues with QuickTime Media Player: –

Issue #1: QuickTime plays video with no sound


Check whether you have installed latest version of QuickTime

In case, if you haven’t updated your QuickTime media player to latest version, go through the procedure shown below and update your QuickTime Media player.

  1. Open QuickTime media player and select Help from drop down menu
  2. Select Update Existing Software
  3. Here you will see a message “Apple Software updates are available for your computer. Would you like to update now?“, if Apple has released a new version
  4. Click on Ok

Next, make sure that video is compatible with QuickTime Media player

If QuickTime media doesn’t support the video file which you are trying to play, then convert it to the format supported by the media player.

If there is no problem with video compatibility and of QuickTime, then check you have all the required plug-ins installed. You need to install Perian, Flip4Mac, or other plug-ins to get supported QuickTime codec.

If still your QuickTime video file unable to play sound, then uninstall your QuickTime media player and reinstall it. If the problem is with a newer version, then downgrade to the old version.

Issue #2: Error “This movie requires QuickTime, which is not supported by this version of iTunes”

Solution: You may encounter an error while playing QuickTime video in iTunes. Because iTunes by default opens in 64-bit mode. But, QuickTime runs in 32-bit mode. To resolve this issue, do as follows-

  • Exit from iTunes
  • Then, go to Finder and click on iTunes icon
  • And from a list of option, select “Open in 32-bit mode” option

Issue #3: Screen Recording in QuickTime may stuck

Solution: Screen recording got stuck while trying to save the recorded video? Then, read here to know how to resolve the problem-

  1. under Applications folder, go to Launchpad and search for Terminal
  2. Type top -u command in terminal and hit Enter
  3. Look for the QuickTime process id (PID) and note down it
  4. Next, type following command in Terminal

sudo kill [PID] (Replace PID with QuickTime process id)

  1. And, hit Enter button to stop the process

Issue #4: QuickTime video crash in browser

Solution: Get required QuickTime plug-ins for Chrome, Firefox or Safari. If it doesn’t solve the issue, try to play your QuickTime video in other media players like VLC, which supports any video type.

Issue #5: QuickTime Error 2048

Solution:  You may get this error either due to QuickTime media player corruption or video file corruption. To solve the issue, try to reinstall QuickTime player if media player got corrupted. Or else get a reliable video repair software and fix video which is corrupted.


Mac Startup Options to Solve Booting Issue

Sometimes, Mac won’t boot and prompts blank screen or an audible beep thus restricts you from accessing data stored on it.  In such cases, you can troubleshoot problems that result in unbootable Mac. To do that, you have to access boot options where you can use Apple Hardware Test and other Mac repair options.

Here I have listed out various boot options available in Mac OS X, through which you can turn your unbootable Mac to bootable state.

  1. Booting from CD or Bootable Disc

If you want to boot using CD or any other bootable disc, then insert the disk and hold down the C key on your keyboard. It will help you to boot into Mac OS X.

  1. Apple’s Hardware Test

You can access Apple’s Hardware Test while booting from a disc which comes with your computer. Hence, hold down the D key while rebooting which help you to enter Apple Hardware Test.

  1. Reset PRAM and NVRAM

When PRAM and NVRAM gets corrupted, you fail to boot into Mac OS X. Hence, it is better to reset both PRAM and NVRAM. To do so, hold down the Command + Option + P + R keys until Mac restarts and you hear the startup sound for second time. After that, release the keys. It will reset PRAM and NVRAM.

  1. Selecting Bootable Devices

To enter boot screen, hold down Option key. Once you enter boot screen, check for bootable devices and select the one which you want to boot into Mac OS X.

  1. Eject, F12, or Mouse/Trackpad

If you unable to remove discs that are trapped in your optical drive, then restart your Mac by holding Eject key, F12 key, or your mouse or trackpad button.

  1. Network Boot

Hold down the N key while starting Mac to boot from network, in case your setup has compatible network server. If you use Option + N keys, then you can start from a NetBoot server using the default boot image provided.

  1. Target Disk Mode

If you want to recover files from unbootable Mac, then Target Disk Mode boot option is best choice. So, press T while starting Mac to enter Target Disk Mode.

  1. Safe Mode

To enter Safe Mode, hold down the Shift key while rebooting your Mac OS X. This boot option loads only required kernel extensions and disables non-system fonts, all startup items, and login items that are not required.

  1. Verbose Mode

Using Command + V keys, you can boot your Mac into Verbose Mode. This key combination will show a terminal-like interface during startup. It consists data that is important for booting. And also allows to spot startup problems.

  1. Single User Mode

To boot your Mac into Single User Mode, use Command + S keys. In this mode, you can communicate with your computer through text input. This mode helps you to fix startup issues or alter software which prevents startup.

  1. Lion Recovery Mode

In case, you have Mac OS X Lion on your computer, then hold down Command + R keys which helps you to load into Lion Recovery Mode.

If you fail to boot into Mac even after using these boot options, then try Remo Mac Recovery and get back your data from unbootable Mac. The tool can also be used to restore a deleted partition on Mac and to recover data from formatted Mac partition.