Tips to Prevent External Hard Disk Drive Failure

With a little care, you can prevent your external hard drive from failing. Of course, you don’t want to lose all your pictures, videos, documents, and other system files stored on the external drive. So being a little proactive, looking for any signs of drive failure, and implementing these simple methods to prevent your external HDD from failing sure goes a long way!

External HDD

Here are some of the techniques which help to avoid external hard drive from failing:

Before we could start off, here’s a note. When your external hard disk stops working all of a sudden, don’t conclude that it has failed. Check if the USB cable is connected properly.

  • Firstly, prevent common external drive failure issues

External hard drive failure can be caused by electrical or environmental related factors. Electrical dangers include power loss, electrostatic discharges, etc. Environmental factors include temperature, air quality, condensation, and so on. Although it is not easy to take care of these things, make sure you are careful, and watch out for any signs of failure.

  • Monitor external HDD’s health

The external hard drive’s health is the prime indicator of a drive failure. You can easily monitor the drive health with the help of CHKDSK, which is installed in Windows system. If you find any issues using CHKDSK along with S.M.A.R.T programs, then you can fix them right away.

  • Proper surface for the drive

The external hard drive must be placed on a level, flat, and non-slippery surface while in use. It shouldn’t be placed on a surface which retains the heat in the drive, like paper, or cloth.

  • Don’t overload the drive

When data load in the external hard drive is reduced, it increases the life of the drive. Also, it reduces the wear and tear caused by data being full. So always keep on important files on the external drive, and remove unwanted/unused files.

  • Properly remove the drive

You must always make it a habit to remove external drive from the system by using ‘Safely remove hardware’ option from the system tray. Sometimes during file transfer, the write process can be delayed before being transferred to the external drive, although the system indicates that the transfer process is complete. Under such a situation, to ensure that all files have been transferred completely, using Safely remove hardware option is necessary.

  • Use it carefully

External hard drives are prone to damage caused by swift motions or excessive vibrations. So make sure that the drive is in a safe location while in use. If the external drive has to be transported, then wrap it in some soft material to avoid damage.

Sometimes, you might have ignored symptoms exhibited by external hard drive before it fails. Also, you would not have followed these precautionary measures to prevent external hard drive failure. You end up losing data stored on the drive after it fails. But don’t worry, you can recover external hard disk data after a failure. In just a few steps, this Data Recovery tool will get back all files stored on the external hard drive.

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *